PROCESS MATERIAL TO BE MEASURED: 
Liquid  Slurry (% solids)  Granular  Powder 
Dielectric Constant (capacitance only): 
Agitation:  None  Light  Strong 
Bubbles or Foam present:  Yes  No 

Process: 
Max:  Normal:  Min: 
At electronics:  Max:  Min: 

Max:  Normal:  Min: 

PROCESS WETTED PARTS MATERIAL (i.e. probe, transducer, flange, etc.):
(Check one for desired technology): 
Ultrasonic transducer (  PVC ,  CPVC ,  Kynar,  Teflon ,  316 STS) 
Ultrasonic Gap switch (  PVC ,  CPVC ,  Kynar ,  316 STS ,  Hastelloy-C,
Monel) 

Capacitance (  304 STS,  316 STS ,  Monel ,  Hastelloy-C ) 

w/o Teflon sheath  w/ Teflon sheath (needed for XP rating)

Flange ( Carbon Steel, 304 STS,  316 STS,  Hastelloy-C,  CPVC,  Kynar,  Teflon)

TANK / VESSEL INFO:
Measurements are in:  cm  in. 
Tank Diameter:      Tank Height / Length:     Tank Material: 
Location of level instrument compared to tank wall: 
Vessel Conditions: 
clean air 
vapor / mist 
dust ( Check one:  hazy  cloudy  foggy  opaque ) 
Filling Method: 

SWITCHES 
Number of setpoints: 

Actuation points measured from bottom of process connection threads to the top of the gap for ultrasonic switches, and from the bottom of the probe for capacitance switches.

TRANSMITTERS
Measurement Range / Probe Length: 
Max.      Min.

Teflon® sheathed probes have a .5" unusable  nipple at the tip. Transducers have a min. deadzone of 12 in. (16" for 316 STS). If alarm points are needed please indicate location under switches section.