News
TYCO VALVES AND CONTROLS PROPHETSTOWN ANNOUNCES FORMAL RELEASE OF A NEW SERIES OF BOILER TRIM ELECTRONIC LEVEL INDICATORS. MAJOR BOILER
MANUFACTURERS WILL WELCOME THE NEW DESIGNS RECOGNIZING THE TYCO PROPHETSTOWN FACILITY AS THE LEADERS IN LEVEL INDICATION.
The new introduction of Tyco Valves and Controls Boiler Trim Electronic Level Indicators will create a positive position at major End
Users, OEM and A&E accounts. The expanded models will offer the customer additional options and cost savings.
Applications will be:
- Boiler Drum Level Indication
- Mainsteam header drains
- Hot and cold reheat
- Turbine extraction drain
- Turbine water induction prevention [TWIP]
- Hot well alarms
- Deaerator storage level alarms
- HP and LP Feedwater Heaters
- Blow-down flash tank
Based on the conductivity probe technology now widely accepted in the industry, all models are specifically designed to meet industry’s
growing needs and demand for reliable, cost effective and versatile means of sensing water levels in a variety of applications.
The Boiler Trim Electronic Level Indicators are designed as an electronic alternative to water level glass gages on steam boilers.
They provide local and remote indication, analogue outputs as well as custom alarms and trip outputs. The system consists of a water column,
electrodes, and a Detection Verification electronics unit.
Many opportunities exist to use these indicators at older installed boilers utilizing camera transmitted gage images, fiber optic systems and mirrors. All
electronic units are designed around reliable, continuous and uninterrupted low maintenance operation.
For information on these and other Tyco Valves and Controls products manufactured at our Prophetstown facility, please contact your
nearest Penberthy or Tyco product distributor, or feel free to contact the factory directly.
Remote Liquid Level Indicator
Penberthy is pleased to introduce the Remote Liquid Level Indicator (RLLI). This indicator which is a product of trim design specialists, represents water level by comparing a constant head to the variable head of the liquid in the vessel. The RLLI is very
versatile and can also be used on feedwater heaters, elevated storage tanks, and open tanks.
Click here to read more about the exciting new product offering.
Penberthy Expands Sanitary Product Offerings
- Jets: Base models SLL, SLM, SLH, SGL, SGH, SHLM, SCTE
- Sight Flow Indicators: Base models SSFI, SDWSF, SSW
- Magnetic Level Gages: Base model SMG
- Ultrasonic Gap Switches: Base model SUGS
Sanitary Jet Pumps
Penberthy is proud to announce that we have the following six models in our sanitary jet pump line.
Models SLL, SLM, SLH, SGL, SGH and SHLM in sizes 1", 1 1/2", 2" and 3". Please note that the letter "S" shown
in front of our current model designations indicates that the unit is for sanitary design. The performance characteristics
for these units are the same as the standard units. Therefore, the sizing tables shown in Penberthy Bulletin #1200 (Pumping Liquids),
Bulletin #1300 (Pumping Gases) and Bulletin #1400 (Heating Liquids) would apply to these units.
- Models SLL, SLM and SLH are used to pump liquids with a liquid as the operating source. Model SLM can also be used to pump gases
with a liquid as the operating source
- Models SGL and SGH are used to pump liquids with steam as the operating source. These two models are also used to pump gases or
steam with either another gas or steam as the operating source
- Model SHLM is an in-line heater that is used to head a liquid flow stream using steam.
Who is my Penberthy Distributor or Representative?
In response to requests by our valued customers, we have expanded the contact section of our web site. You can now locate your nearest
Penberthy distributor or representative on-line. In addition, we have added contact information for Penberthy's regional sales managers
and factory product teams.
Click here to check out this exciting new addition to our web site.
GST Jet Pump
The model GST (Gas operated Solid Transport) jet pump is designed to pneumatically convey powders and bulk solids via dilute phase.
The Penberthy GST is useful in applications where fast, efficient transfer of particulate dry solids is desired. An excellent replacement
for conventional auger or belt conveyors, the GST has the advantage of containment of the material being moved and the material is not
susceptible to loss or external contamination.
Unlike a vacuum-based system that uses suction entrainment, the GST is a true pump that entrains at the material source and pushes
the mix through the system. The Penberthy GST jet pumps use the tendency of a moving stream of air to shear toward a boundry surface,
known as Coanda effect. This shearing effect and the geometry of the jet pump causes an entrainment of ambient air and solid material
in front of the jet pump. The air and entrained solid materials are then transported down a length of pipe. In general, piping and
feed requirements that provide good material flow in an existing vacuum or blower system are applicable to the GST jet pump. The material
feed is at ambient pressure, thus the use of rotary valves and / or blow tanks may be eliminated. In certain applications, the model
GST used alone can replace the function of some dual vacuum / positive pressure systems.
Typical industries that can benefit from the use of the model GST are:
- Plastic / resins manufacturers and users
- Particulate chemical manufacturers and users
- Grain handling
- Mining
- Fertilizers
- Sugar / salt mills
- Other food products
- Foundries
|
Gagecocks